Operation - Cameo ROOT PAR 4 Manuel D'utilisation

OPERATION

PLEASE NOTE
• As soon as the spotlight is correctly connected to the power supply, the following will be displayed in succession: "Welcome to Cameo",
the model name and the software version. After this process, the lamp is ready for operation and starts in the previously enabled mode.
• To return directly from the submenus to the main display, press and hold MODE for around two seconds. The main display is activated
automatically after approximately two minutes of no input. To navigate one level up in the submenus, briefly press MODE.
• To directly access the previously edited menu item, briefly press MODE and ENTER at the same time.
• Briefly pressing the UP button when in the main display rotates the display by 180°.
• To quickly change a value, such as the DMX start address, press and hold UP or DOWN.
MAIN DISPLAY DMX OPERATING MODE
The display shows the DMX address and current DMX start address (in the example: 001). If the DMX Delay feature is activated, the delay
group and delay time are also displayed.
DMX Address
001
Gr 1 2.0 s
MAIN DISPLAY STANDALONE MODE
The display shows the currently activated standalone mode (Mode Auto, Mode Sound, Mode Static, Mode Color Preset,
Mode User Color, Mode Loop).
Mode Mode
Auto Sound
MAIN DISPLAY SLAVE MODE
The display shows Mode Slave. If the slave unit is assigned to a slave group, the slave group and
the delay time set in the master unit under the standalone operating modes Auto and Loop are also displayed.
Mode
Slave
Gr 1 2.0s
CONFIGURE DMX START ADDRESS
Press MODE to access the main menu. Now use UP and DOWN to select the menu item DMX address and confirm with ENTER. You can
now configure the DMX start address with UP and DOWN. Confirm with ENTER and press MODE once to return to the main display. The main
display is activated automatically after approximately two minutes of no input.
--------Menu------- ----DMX Address----
DMX Address DMX Address
001–512
DMX Mode DMX Mode
DMX Delay DMX Delay
Standalone
Slave
Settings
System Info
8
Mode Mode
Static Color Preset
Mode Mode
User Color Loop