Bosch PCM 8 S Notice Originale page 29

OBJ_BUCH-557-005.book Page 29 Tuesday, July 5, 2011 4:08 PM
Symbols and their meaning
Wear ear protectors. Exposure to noise
can cause hearing loss.
Observe the dimensions of the
saw blade. The hole diameter
must match the tool spindle
without play. Do not use re-
ducers or adapters.
Do not dispose of power tools into house-
hold waste!
Only for EC countries:
According to the European Guideline
2002/96/EC for Waste Electrical and Elec-
tronic Equipment and its implementation
into national right, power tools that are no
longer usable must be collected separately
and disposed of in an environmentally cor-
rect manner.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. Horizontal
mitre angles of –47° to +53° as well as vertical bevel angles
of 0° to 45° are possible.
The machine is designed with sufficient capacity for sawing
hard and softwood as well as press and particle board.
The power tool is not suitable for cutting aluminium or other
non-ferrous metals or alloys.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Dust bag
2 Sawdust ejector
3 Cable holder
4 Button for releasing the tool arm
5 Handle
6 Blade guard
7 Retracting blade guard
8 Saw blade
9 Roller
10 Fence
11 Holes for quick-action clamp
12 Insert plate
Bosch Power Tools
13 Locking knob for various mitre angles
14 Mitre angle indicator
15 Scale for mitre angle (horizontal)
16 Mounting holes
17 Saw table
18 Drill holes for extension bars
19 Extension bar
20 Allen key (size 6 mm)/Phillips screwdriver
21 Stop screw for 45° bevel angle (vertical)
22 Stop screw for 0° bevel angle (vertical)
23 Laser unit
24 Lighting unit (Power Light)
25 Slide device
26 Transport handle
27 Laser warning label
28 Switch for light ("LED")
29 Switch for marking of cutting line ("Laser")
30 Depth stop
31 Bevel lock lever
32 Locking screw for slide device
33 Allen screws (6 mm) of the fence
34 Recessed handles
35 Transport safety-lock
36 Battery compartment
37 On/Off switch
38 Material stop
39 Saw-Table extension
40 Fastening kit for extension bar
41 Casing fin
42 Base unit*
43 Fastening kit for "base unit"*
44 Spindle lock
45 Allen screw (size 6 mm) for mounting of saw blade
46 Clamping flange
47 Interior clamping flange
48 Wing nut for locking of the saw-table extension
49 Quick-action clamp
50 Quick-release button
51 Locking knob of the quick-action clamp
52 Wing nut of the quick-action clamp
53 Indicator for bevel angle
54 Wing nut for locking of the length stop
55 Lock nuts of the depth stop
56 Stop nut of the depth stop
57 Casing stop for depth stop
58 Screws for insert plate
59 Cover
60 Knurled screw
61 Set screw for horizontal laser positioning
62 Set screw for vertical laser positioning
63 Scale for bevel angle
English | 29
1 609 929 U68 | (5.7.11)