Changing The Fan Speed; Using The Light On/Off Function - Philips AC5659 Mode D'emploi

Changing the fan speed

In addition to the Auto modes, there are
several fan speeds available.
When using the manual fan speed
settings, the purifier will still monitor the
air quality, but it will not automatically
adjust the fan speed if it detects
changes in the air quality.
Sleep mode ( )
In Sleep mode, the air purifier operates
quietly at a very low speed.
•
Touch the fan speed button
select the Sleep mode (SL) (fig.o).
» The " " displays on the
screen.
» The sleep mode indicator
goes on.
Manual
•
Touch the fan speed button
repeatedly to select the fan speed
you need (fig.p):
(Speed 1)
(Speed 2)
(Speed 3)
Tips
• If the air quality light lights up blue,
it indicates that the air quality is
good, and you can select a lower fan
speed. On the other hand, if the air
quality light lights up red-purple or
red, it indicates that the air quality
is unhealthy, and you can select a
higher fan speed to purify the air more
quickly.
Turbo (t)
In turbo mode, the air purifier operates
on the highest speed.
•
Touch the fan speed button
select the turbo mode ( ) (fig.q).
» The " " displays on the screen.
» The turbo speed indicator
goes on.
Using the light on/off
function
to
With the light dimming button, you can
switch on or off the air quality light,
the display screen and the function
indicator if desired.
1
Touch the light dimming button
once, the air quality light will be
dimmed.
2
Touch the light dimming button
again, the air quality light will go off.
3
Touch the light dimming button
for the third time, all lights will be on
again.
to
EN 9