Switching The Display Indicator; Setting The Child Lock - Philips AC5659 Mode D'emploi

Switching the display
indicator
The air purifier has three display
indicators, IAI index, PM2.5 index, and
Gas level.
Note
• The air purifier operates in IAI index by
default.
1
Touch the light dimming button
for 3 seconds to switch to PM2.5
display mode (fig.r) .
» The PM2.5 level displays on the
screen.
2
Touch the light dimming button
for 3 seconds again to switch back
to IAI display mode (fig.s).
» The IAI indicator and the actual
IAI index display on the screen.
3
Touch the light dimming button
for 3 seconds again to switch to Gas
level display (fig.t).
» The Gas indicator and the
actual Gas level display on the
screen.
Note
• It is possible that the air quality light
may still be red even if the PM2.5
index is very low. It's normal. This is
because that at least one of the index
( the IAI index or Gas level) is high that
turns the air quality light to red. The
appliance real-time displays the air
quality index with the highest risk.
10 EN

Setting the child lock

1
Touch and hold the child lock
button for 3 seconds to activate
child lock (fig.u).
» The child lock icon
on the screen.
» When the child lock is on,
all the other buttons are not
responsive.
2
Touch and hold the child lock
button for 3 seconds again to
deactivate child lock.
» The child lock icon
disappears.
Note
• You can still control the appliance
through the App even child lock is
activated.
displays