Using The Air Purifier; Understanding The Air Quality Light - Philips AC5659 Mode D'emploi

Note
• This instruction is only valid when
the air purifier is being set up for the
first time. If the network has changed
or the setup needs to be performed
again, consult section "Reset the Wi-Fi
connection" on page 7.
• If you want to connect more than
one air purifier to your smartphone
or tablet, you have to do this one by
one. Complete the set up of one air
purifier before you turn on the other air
purifier.
• Make sure that the distance between
your smartphone or tablet and the air
purifier is less than 10 m without any
obstructions.
• This App supports the latest versions
of Android and iOS. Please check
www.philips.com/cleanhome for the
latest update of supported operating
systems and devices.
Reset the Wi-Fi connection
Note
• This applies when the default network
to which your purifier is connected has
changed.
• Reset the Wi-Fi connection when your
default network has changed.
1
Put the plug of the air purifier in the
power socket and touch
on the air purifier.
2
Touch and simultaneously for
3 seconds until you hear a beep.
» The air purifier goes to pairing
mode.
» The Wi-Fi indicator
orange.
3
Follow the steps 4-5 in "Setting up
the Wi-Fi connection for the first
time" section.
4 Using the air
Understanding the air
quality light
IAI is a real-time numerical display that
provides visual and immediate feedback
on indoor allergen level.
IAI
1-3
4-6
7-9
10-12
The air quality light automatically goes
on when the air purifier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.
IAI
The professional-grade AeraSense
sensor detects the level of indoor air
allergen and with numerical feedback
from 1 to 12 the potential risk level of
indoor air allergens can be displayed.
to turn
1 indicates best air quality.
GAS
With an advanced as sensor, a display
ranging from L1 to L4 shows the density
level of potential harmful gases (incl.
blinks
VOC, odor, etc.) detected. L1 indicates
best air quality.
purifier
Air quality Air quality
light color level
Blue Good
Blue-Purple Fair
Purple-Red Poor
Red Very poor
EN 7