Kenwood TK-2170 Mode D'emploi page 43

3 Press the S or
4 Enter the desired name for the list entry using the
DTMF keypad.
• If enabled by your dealer, you can also rotate the selector
to select a digit. Press the C> key to confirm the digit.
Repeat this operation until the complete name is entered.
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all entered
characters.
5 Press the S key to confirm the entry.
• "
entered name.
6 Enter the desired DTMF number using the DTMF
keypad.
• If enabled by your dealer, you can also rotate the selector
to select a digit. Press the C> key to confirm the digit.
Repeat this operation until the complete number is
entered.
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all entered
characters.
7 Press the S key to confirm the entry.
• "
entered number.
• If you are overwriting a previous entry, "
appears on the display.
8 Press the S or
number in the Autodial list.
• Press the A or # key to cancel the entry.
■
D S
IALING TORED
1 Press the key programmed as Autodial.
• If programmed by your dealer, you can also press the # key.
• The first entry in the Autodial list appears on the display.
key to confirm the list number.
" appears on the display after confirming the
" appears on the display after confirming the
key to store the entered name and
DTMF N
UMBERS
"
33