Appliance Use; Reverse Function - R.G.V. DUETTO PLUS Mode D'emploi Et D'entretien

Operate as follows
- After assembling the appliance for the intended use, as described in the preceding
pages, plug it into an electrical outlet.
Before plugging the appliance into an
electrical outlet, make sure that the
power switch (T) is set to "0" (OFF).
Before plugging in the motor unit,
make sure that the mains voltage
corresponds to what is indicated on
the nameplate.
f1 - Push the "
f2 - Start the appliance by pushing the "ON" power
switch (T).
f3 - Put the food to be processed in the tray (D)
and push it into the infeed duct (B) using the
appropriate press (F).
DO NOT INSERT FINGERS, UTENSILS OR
METAL OBJECTS IN THE INFEED DUCT (B)
IN ORDER TO PRESS FOOD IN.
ONLY USE THE PRESS (F).
Do not operate the appliance continuously
for more than 10 minutes. Alternate periods
of operation with breaks of at least 10
minutes.

REVERSE function

f4 - If the auger gets blocked, reverse its direction
of advancement by pushing on the switch
" " (U) and then holding down the power
switch "R" (T) for the amount of time needed
to unblock the auger.
40

Appliance use

" switch (U).
"0"
T
220-240V~ 50Hz
F
B
T
U
D
U