To Use The "Grater - R.G.V. DUETTO PLUS Mode D'emploi Et D'entretien

d3 - Position the conical part of the kibbe accessory
(Q1) on the infeed duct (B).
d4 - Tighten the ring nut (O) using your hands.
While tightening the nut (O) with the other
hand hold the infeed duct (B).
Do not use the star blade (I) or the disks
for grinding for kibbe preparation.

To use the "GRATER"

e1 - Press the lock button and insert the cutting mechanism made of white plastic in the
entrance of the tube.
During insertion, make sure that the plastic cutting mechanism is
inclined as indicated by the arrow).
Turn the plastic cutting mechanism clockwise until it is fully tightened, and then release
the lock button.
e2 - Put the barrel of the grater into the cutting unit, and then rotate the cylinder clockwise
so that it is properly closed.
e3 - Put the tool to push the ingredients in the upper part of the cutting mechanism and
push slowly the foods inside.
Now the 'device' is ready to use.
e1 e2
Q1
B
O
e3
39