For Use As A "Meat Grinder - R.G.V. DUETTO PLUS Mode D'emploi Et D'entretien

For use as a "MEAT GRINDER"

b1 - Position the motor unit (A) on a horizontal and
stable plane (table, etc.).
Make sure the power cord is not
plugged into the power outlet.
b2 - Position the infeed duct (B) on the insert (A1) of
the motor unit (A).
b3 - While holding down the quick-release button
(S) rotate the infeed duct in a counter-clockwise
direction (B) to lock it into position.
Relaase the quick-release button (S).
Make sure that the auger(H) is fitted on the
teflon coating and the metal washer (X) and
that these are intact. Otherwise, replace
them by going to a point of sales.
A1
B
B
A
S
X
H
35