Philips HD6103 Mode D'emploi page 9

Masquer les pouces Voir aussi pour HD6103:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 45
-
Carefully shake off as much ice and water as possible and dab the food to be fried until it is
properly dry.
-
Do not fry very large quantities at one time. Do not exceed the quantities mentioned in the
food table at the end of this booklet ( - indicates the recommended quantity).
Getting rid of unwanted flavours
Certain types of food, particularly fish, can give the oil or fat an unpleasant flavour. To neutralise the
taste of the oil or fat:
1
Heat the oil or fat to a temperature of 160°C.
2
Put two thin slices of bread or a few sprigs of parsley in the oil.
3
Wait until no more bubbles appear and then scoop the bread or the parsley out of the fryer
with a spatula.
The oil or fat now has a neutral taste again.
Home-made French fries
You make the tastiest and crispiest French fries in the following way:
1
Use firm potatoes and cut them into sticks. Rinse the sticks with cold water.
This prevents them from sticking to each other during frying.
Note: Dry the sticks thoroughly.
2
Fry the French fries twice: the first time for 4-6 minutes at a temperature of 160°C, the
second time for 5-8 minutes at a temperature of 175°C.
Let the French fries cool down before you fry them for the second time.
3
Put the home-made French fries in a bowl and shake them.
cleaning
Let the oil or fat cool down for at least 4 hours before you clean or move the fryer.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Never immerse the fryer housing in water.
1
Open the lid (Fig. 2).
2
Pull the lid upwards to remove it (Fig. 13).
3
Lift the frying basket out of the fryer.
4
Pour out the oil or fat (Fig. 14).
preclean function
This appliance is equipped with a PreClean function, which allows you to soak the inner bowl with
hot water and washing-up liquid to make cleaning easier.
Make sure you have removed the oil or fat from the inner bowl before you use this function.
1
Fill the inner bowl with cold water up to three quarters of its capacity and add some
washing-up liquid. (Fig. 15)
2
Put the plug in the wall socket.
EnglisH
9

Publicité

Table des Matières
loading

Table des Matières