Publicité
Les langues disponibles
Les langues disponibles
7. REMOTE OPERATION
6. Timer switch
"TIMER ON/OFF" is to control the timed opening and closing
In the standby mode, when reopen the fireplace, it is can remember the last time
setting.
Note 1: When the week timer is power on, you should turn on the heating function, or
else when the machine is working again, there will be only the flame effect working.
7. Fire Sound
The fire sound has the ranges from zero to five positions, "0" position without fire
sound, the "5" position is the biggest sound, in the standby mode, when reopen
the fireplace, it is can remember the last time setting.
When you want to setting the fire sound, press the button of "▲" or "
When you press "▲", the biggest position is "5". When it is "5" position, when you
press "▲" again, it will be no working.
When you press "
▼
when you press "▼" again, it will be no working.
When setting the fire sound, The photos of "
position. For example: Fire sound of 5→4→3→2→1→0, it is showing like
below:
→
8. SAFETY CUT-OFF
This appliance is fitted with a safety cut-off which will operate if the fire
overheats (e.g. due to blocked air vents). For safety reasons, the fire will NOT
automatically reset.
To reset the appliance, disconnect the appliance from the mains supply for at least
15 minutes. Reconnect to the mains supply and switch on the appliance.
9. TROUBLESHOOTING
Symptom
No operation/ no fan.
No fire effect light.
117
", the "0" position is without sound. When it is "0" position,
→ → → Blank
→
Check if put the electric plug into the socket.
Check for safety cut-off operation.
Check the LED system by qualified
electrician
" directly.
▼
" showing the fire sound
Solution
FR
FR
ES
ES
PT
PT
IT
IT
EL
EL
PL
PL
UA
RU
KZ
RO
EN
UA
RO
BR
EN
Publicité
