Safety Instructions - SATA AB1 Mode D'emploi

Operating Instructions SATA AB 1
EN
1.3. Accident prevention
As a basic principle, the general and specific national accident prevention
regulations must be heeded, together with corresponding workshop and
industrial safety instructions. Users of breathing protection units need a
medical examination to ensure their suitability. In Germany, this is subject
to the "guidelines on the principles for preventive medical check-ups in
the workplace, G 26: users of breathing protection units for work and res-
cue". Furthermore, due consideration must be given to the pertinent regu-
lations as per breathing protection leaflet DGUV rules 112-190.
1.4. Replacement, accessory and wear-and-tear parts
Always only use original SATA spare parts, accessories and wear parts.
Accessories not supplied by SATA have not been tested and approved.
SATA assumes no liability for damage caused by the use of non-approved
spare parts, accessories and wear parts.
1.5. Warranty and liability
The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA is not liable in case of
■ non-adherence to the operating manual.
■ use of untrained personnel.
■ unintended use of the product.
■ personal protection gear not being used.
■ original accessory and spare parts not being used.
■ independent conversions or technical changes.
■ natural wear and tear.
■ abnormal impact.
■ impermissible assembly and disassembly work.

2. Safety Instructions

Read and comply with all directions listed in the following. Non-compli-
ance or incorrect compliance can lead to malfunctions or severe injuries
and even death.
2.1. Requirements regarding personnel
The SATA AB1 may only be installed, connected, commissioned and
maintained by experienced skilled workers and instructed persons who
have thoroughly read and understood these operating instructions.
38