Helite E-TURTLE Manuel D'utilisation page 25

3. RECHARGING THE VEST
The vest has an autonomy of 25H when it is switched ON which is about one week of
use.
Green LED: System operational
You can use the vest.
See schema 3 on the schematic manual
How to recharge the vest
a) Open the zip on the right front.
b) Connect the charger to the corresponding connector (battery symbol).
c) Charging time: up to 3 hours
You must use the Helite USB cable included with your vest. Only the cable is
included, you have to plug it afterwards into a standard USB charger (5 Volt USB
port on your computer or mobile phone charger).
During the charging, the LED will remain orange. The charging time is around 3 hours
with the Helite USB cable included with the vest. As soon as the LED turns green
the charging is completed and you can reuse the vest.
CAUTION
Never recharge the vest when it is worn. Do not charge the vest near flammable
surfaces or objects.
4.VEST LED DESCRIPTION
To know if the system is working properly, here are the 4 LED colors used and their
different significations:
More info on page 31 about the operation of the LEDs and the beeps.
User guide
*only for additional Fork Sensor option
Orange LED: Battery low
You need to recharge the vest.
Green LED: System operational
Orange LED: Battery low
Blue LED: Pairing *
Red LED: Problem
No LED: vest off or in sleep mode
25