Settings - Gaggenau DF250 Notice D'utilisation

en-us
Getting Started

Settings

The dishwasher has been preset with certain settings
for your convenience. You can change these factory
setting.
Change the setting as follows:
1.
Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button ( 8 for 3 seconds until the
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with t 3 sec.
Setting
Time setting
Time format
Time display
Language
Water hardness
Rinse aid disp.
Sensor setting
Extra dry
Eco forecast
Auto Power Off
Emotion Light *
Front display *
Remaining time proj. *
Infolight *
Start wash cycle
Tone volume *
Button volume
Child-proof lock *
Eco drying *
Greeting
Factory setting
* depending on the features of your dishwasher
14
Factory setting Infotext
by pressing Info button (
12:00 Set the current time.
24h 12h or 24h.
Time Show end of wash cycle with display "Finish in" or "Finish at".
American English Language selection.
°E 0 Setting water hardness. When using Multitabs, select the lowest
setting.
Level 5 Amount of rinse aid affects drying. When using Multitabs, select
setting 0.
Standard Adjustment of soiling detection for optimum cleaning result.
Off Improved drying for glasses and plasticware.
Off Show the water and energy consumption.
Off Appliance automatically switches off at end of rinsing process.
On Interior light.
On The front display can be selected.
On While wash cycle is running, status information is projected onto
floor.
On Light is projected to signal an active wash cycle.
Auto 130-150° F When switching on, the last selected wash cycle appears.
Level 2 Volume of signal at end of wash cycle.
Level 2 Volume when using buttons.
Off Activated child-proof lock impedes opening of door.
On Door opens automatically at the end of the wash cycle.
On When switching on the appliance, the brand logo can be
deselected.
Reset Resetting to the factory setting.
Keep pressing button > )* until the required setting
4.
is displayed.
5. Make the selection with setting buttons + - X.
6. Press and hold the Info button ( 8 for 3 seconds.
The chosen setting has now been stored.
You have the option of resetting all changed settings
back to the original factory settings.
Note: When you reset your dishwasher to the factory
settings, you are taken directly to the settings for
switching on the appliance for the first time.