Eaton CGLine+ Web Controller Guide D'installation Rapide page 5

Usually the network card is on DHCP , i.e. "Automatically reference IP address" .
Modify the entry to "Use the following IP address" and specify the following
values for the IP address and the subnet mask (displayed automatically):
IP address: 192.168.1.50
255.255.255.0
Subnet mask:
Clicking on OK assumes the settings so that the web page of the CGLine+ web
controller can now be opened via any web browser, e.g. Firefox. Open a web
browser and enter the IP address "192.168.1.200" into the address bar.
The network card modifications should be reset following configuration of the net-
work settings of the web controller.
The start screen of the CGLine+ web controller now opens.
1
A login is necessary. Two accounts are available:
1
1. User: Admin
User: User
2.
To modify the network settings, please login as Admin.
Quick installation manual CGLine+ Controller 40071860241 www.ceag.de
Commissioning and modifying network settings
Password: EATON
Password: GUEST
GB
5