Eaton CGLine+ Web Controller Guide D'installation Rapide page 3

Commissioning and modifying network settings
GB
230V/AC
patch cable
The CGLine+ web controller is supplied as standard with the fixed IP address
192.168.1.200.
Operation via dhcp (dynamic IP address assignment) is possible but not factory-
activated.
Because typical company networks only permit own-assigned IP addresses, we
recommend configuring network settings via direct connection to a PC, e.g. a
notebook.
The devices must be in the same subnet, meaning the network card of the PC
must be set to 192.168.1.xxx (not equal to 200), e.g. 192.168.1.50 (subnet to
255.255.255.0).
Settings for gateway and DNS must not be taken into account with a direct con-
nection.
3
Quick installation manual CGLine+ Controller 40071860241 www.ceag.de