Beta 1947G Mode D'emploi page 9

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL
OR PERFORMING MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
Additional personal protective equipment to wear according to the values found in the
environmental hygiene/risk analysis survey if the values exceed the limits under current
regulations.
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
TECHNICAL DATA
AIR INLET
OPERATING PRESSURE
MAXIMUM CAPACITY:
MAXIMUM CAPACITY:
CARTRIDGE (standard): 400g
DELIVERY
OPERATING TEMPERATURE
WEIGHT
NOISE (ISO 15744)
SOUND POWER LEVEL
SOUND PRESSURE LEVEL
VIBRATIONS (ISO 20643)
VIBRATION LEVEL
uncertainty
KEY TO SYMBOLS
a: air inlet 1/4" GAS
b: cartridge tube
c: handle
d: gun trigger
e: air valve
f: handle orientation throttle screw
1/4" GAS
3 ÷ 10 bar
400 bar (with 10 bar air input)
500g (bulk grease); 400g cartridge
Ø 54 mm – 400g
a 6 bar - 400g/min
0°C +40°C
1.9 kg
LwA = 81.7 dB
LpA = 70.7 dB
5.71 m/s
2
K=0.39 m/s
2
f
e
d
b
EN I
c
a
9