Abus TVAC71000 Manuel Utilisateur page 19

General safety information:

Never look directly into the infrared illuminator from a short distance (1 m). Do not use optical devices such as a magnifying glass
to look directly at the illuminator.

Do not leave packaging material lying around. Plastic bags, sheeting, polystyrene packaging, etc., can pose a danger to children if
played with.

Do not insert any objects into the device through the openings.

Only use replacement devices and accessories that are approved by the manufacturer. Do not connect any non-compatible
products.

Please pay attention to the safety information and user guides for the other connected devices.

Check the device for damage before commissioning. Do not put the device into operation if you detect any damage.

Adhere to the operating voltage limits specified in the technical data. Higher voltages could destroy the device and pose a health
risk (electric shock).
Safety information
1. Power supply: 12 - 24 VAC / VDC
Only operate this device on a power source which supplies the power specified on the type plate. If you are unsure which voltage is
supplied at the installation location, contact your power supply company. Disconnect the device from the power supply before carrying
out maintenance or installation work.
2. Overloading
Avoid overloading electrical sockets, extension cables, and adapters, as this can result in fires or electric shocks.
3. Cleaning
Only use a damp cloth to clean the device. Do not use corrosive cleaning materials.
Disconnect the device from the power supply while doing so.
19
English