Berner BACDCH 12V Notice Originale page 15

The battery can be damaged by pointed ob-
u
jects such as nails or screwdrivers or by
force applied externally. An internal short cir-
cuit may occur, causing the battery to burn,
smoke, explode or overheat.
Only use the battery with products from the
u
manufacturer. This is the only way in which
you can protect the battery against dangerous
overload.
Protect the battery against heat, e.g.
against continuous intense sunlight,
fire, dirt, water and moisture. There is
a risk of explosion and short-circuiting.
Product Description and
Specifications
English
Read all the safety and general in-
structions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or ser-
ious injury.
Please observe the illustrations at the beginning
of this operating manual.
Intended use
English
The power tool is intended for driving and loosen-
ing screws and for drilling in wood, metal and
plastic.
Technical data
English
Cordless Drill/
Driver
Article number
Rated voltage
No-load speed
– First gear min
– Second gear
min
Maximum torque, Nm
soft screwdriving
applications ac-
cording to ISO
5393
Maximum torque, Nm
hard screwdriving
applications ac-
cording to ISO
5393
Max. drilling diameter (first/second gear)
– Wood mm
– Steel
mm
1 609 92A 50N • 19.2.19
BACDCH 12V DCH-B
343789
V= 12
-1
0–400
-1 0–1300
A)
15
A)
30
19
10
The power tool can be used with an angle screw
adapter (DCH-A), an off-set angle adapter (DCH-
E), a bit holder adapter (DCH-B) or a drill chuck
adapter (DCH-D).
Product features
English
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) Tool holder
(2) Torque presetting ring
(3) Gear selector switch
(4) Battery release button (2x)
(5) Battery
(6) Rotational direction switch
(7) On/off switch
(8) Battery charge indicator
(9) Worklight
(10) Bit holder adapter DCH B
(11) Drill chuck adapter DCH-D
(12) Off-set angle adapter DCH-E
(13) Angle screw adapter DCH-A
(14) Locking ring
(15) Handle (insulated gripping surface)
(16) Universal bit holder A)
A) Accessories shown or described are not included
with the product as standard. You can find the com-
plete selection of accessories in our accessories
range.
DCH-D
– –
– –
– –
– –
– –
– –
– –
– –
A)
A)
A)
A)
DCH-E DCH-A
– –
– –
– –
– –
– –
– –
– –
– –
English | 15