Connecting External Components - JVC KW-R935BTS Manuel D'instructions

INSTALLATION/CONNECTION

Connecting external components

Connecting external amplifiers via output terminals
Signal cord (not supplied)
Output terminals
Output terminals 2-way crossover setting
REAR : Rear output
FRONT : Front output
SW : Subwoofer output
40
ENGLISH
MIC (Microphone input terminal) ( 15)
KW-R935BTS: USB cable (DC 5 V
Expansion port (12 V
To the optional SiriusXM Vehicle Tuner (commercially available) ( 12)
JVC Amplifier * 2
3-way crossover setting
Tweeter output
Mid Range output
Woofer output
1.5 A) (approx. 1.2 m/4 feet)
500 mA)
Remote wire (not supplied)
* 2
Firmly connect the ground wire of the amplifier to the car's chassis to avoid
damaging the unit.
To remote lead (blue/white) of the
wiring harness. ( 39)