Publicité
Les langues disponibles
Les langues disponibles
Charging the battery
Charge the battery before starting to use the device. Use the supplied USB cable and the
USB connector on the top side of the phone. Connect the charger to the provided wall
socket adaptor, and then the device to the USB cable. You can charge the phone also
connecting it with the PC USB port, but in this case it will charge more slowly. When the
battery is charging, an animated icon on the screen will show the charging progress if the
phone is on. Once the battery icon is filled, it is fully charged and the phone can be
disconnected from the grid.
Warning: Do not connect the phone to a booting-up or running down PC to avoid voltage
jumps. To preserve the functionality of the product and the integrity of the guarantee, we
recommend the use of NGM original chargers. Please charge the battery indoors, in a dry
and favorable environment. It's normal for the battery to get slightly warm during the
charging process. The battery will reach its full capacity when cycled several times.
Turn on, turn off and standby
To turn on the phone, press and hold the power on/off key. To turn off your device, press
and hold the same key and confirm by selecting "Shutdown". A quick pressure sets the
phone in stand-by mode (screen off) or allows you to go back to the lock screen (see
below).
Dynamic
ENGLISH
25
Publicité
