Maintenance; Cleaning Nozzles; Automatic Cleaning Of Nozzles - Reiner jetStamp graphic 970 Mode D'emploi

jetStamp graphic 970

5. Maintenance

5.1. Cleaning Nozzles

If stripes are printed or if there are any problems with print quality, there may be dry ink at
15
the nozzles .
Print without stripes:
Print with stripes:

5.1.1. Automatic Cleaning of Nozzles

WARNING
Danger of blinding in case of contact between ink and eyes.
Never hold the jetStamp graphic 970 with its nozzles pointing at the face of persons!
f
Trigger automatic cleaning mechanism
A small amount of ink is ejected for cleaning of the nozzles
Take the device from the base station and put it on a level surface.
f
Turn the setting wheel
f
Push the trigger button
f
Fig.

7
to position C.
1
.
A + D
15
.
GB
65