Reiner jetStamp graphic 970 Mode D'emploi page 58

jetStamp graphic 970
Format settings date/time
Format for date
and time:
Current:
Format:
Format characters
dd Day of the month with two graphics (01 to 31)
MM Day of the month with two graphics (01 to 12)
MMM Abbreviation of the month (up to 4 characters))
yy The last two graphics of the year (00 to 99)
yyyy The complete year (0000 to 9999)
HH Hour with two graphics (00 to 24)
hh Hour with two graphics (00 to 12)
mm Minutes with two graphics (00 to 59)
ss Seconds with two graphics (00 to 59)
tt Two characters for twelve-hours format with the letters AM or PM
Font type for date and time
Two fonts may be selected for variable print data like date/time and numbering machine.
Font types can be changed via Settings > Font type
56
Selects a format for date and time from the list.
Date formats with month abbreviations like Aug for August are only
permissible for font 2.
Shows the current format in the current date.
After activation of the field by clicking, the suggested date and time
format can be adjusted to a desired format.
Enter the desired format with the characters listed below.
You may insert additional text into the date or time format by
setting the characters in single quotes ( ‚ ).
Above the input field, you can see if the entered format is valid or if
it contains any errors.
Observe capitalisation when entering the user-defined format.