Panasonic CF-VDW07BH Mode D'emploi page 33

Option Menu
By selecting [Option], you can establish the individual settings for the wireless display.
Default settings
General Wireless Battery
Wireless Connection :
Power on Password :
Supervisor Password :
Touchscreen :
LCD Off Timer :
LCD Off Mode :
Power Off Timer :
100% Excellent
Set or change the Super-
visor Password.
If there is no input from the
touchscreen or button for a certain in-
terval of time, the power may be
turned off.
Set the interval of time to [30 sec],
[1 min], [2 min], [5 min], [10 min],
[20 min], [30 min] or [disable], then
select [OK].
Set the resume function to [Normal
resume] or [Quick resume], then se-
lect [OK].
Normal Resume:
The wireless connection is dis-
abled during display off.
Quick Resume:
Only the screen is turned off dur-
ing display off.
Option Version
Setup
Change
Change
Calibration
30 min
Normal resume
disable
OK Cancel
Change the settings of the wireless
connection in the following proce-
dure.
1 Select [Setup].
<If the Supervisor password has been set>
Enter the Supervisor Password,
then select [Enter].
2 Select the profile that has been set
on the following screen, then se-
lect [OK].
<Wireless display screen>
Select profile.
Profile 1 Profile 2
Profile 3 Profile 4
This screen is a sample.
3 Set the network by the same pro-
cedure as ,
3 4
the Wireless Display" (
19).
Change the password that is input to
run the wireless display.
If there is no input from the
touchscreen or button for a certain in-
terval of time, the display may be
turned off.
Set the interval of time to [30 sec],
[1 min], [2 min], [5 min], [10 min],
[20 min], [30 min] or [disable], then
select [OK].
E
and of "Setup
5
page
33