Working Advice - Bosch GLM 50 C Professional Notice Originale

OBJ_BUCH-2450-006.book Page 41 Monday, December 18, 2017 12:17 PM
English | 41
 For more information, visit the Bosch product page, see QR code, page 8.
For data transmission via Bluetooth®, time delays between mobile terminal/device
and measuring tool may occur. This can be possible due to the distance between both
devices or the object being measured.
Activating the Bluetooth® Interface for Data Transmission to a Mobile Termi-
nal/Device
To activate the Bluetooth® interface, press the Bluetooth® button 6 on the measuring
tool.To activate the Bluetooth® signal, press the Bluetooth® button 6 or the button
3 [+] once again. Ensure that the Bluetooth® interface is activated on your mobile ter-
minal/device.
To expand the functionality of the mobile terminal/device and to simplify the data pro-
cessing, special Bosch applications (apps) are available. These can be downloaded in
the respective stores, depending on the terminal/device.
The connection between mobile terminal/device and measuring tool is established af-
ter the Bosch application has started. If multiple active measuring tools are found, se-
lect the appropriate measuring tool using the serial number.
The connection status as well as the active connection (a) are displayed in the status
bar (h) of the measuring tool.
Deactivating the Bluetooth® Interface
To deactivate the Bluetooth® connection, press the Bluetooth® button 6. To deacti-
vate the Bluetooth® signal, press the Bluetooth® button 6 once again or the button
8 [–] or switch off the measuring tool.

Working Advice

 For more information, visit the Bosch product page, see QR code, page 8.
 The measuring tool is equipped with a radio interface. Local operating restric-
tions, e.g. in airplanes or hospitals, are to be observed.
General Information
The reception lens 14 and the laser beam outlet 15 must not be covered when taking
a measurement.
The measuring tool must not be moved while taking a measurement. Therefore, place
the measuring tool, as far as this is possible, against or on a firm stop or supporting
surface.
Influence Effects on the Measuring Range
The measuring range depends on the lighting conditions and the reflective properties
of the target surface. For better visibility of the laser beam in extraneous light, use the
Bosch Power Tools 1 609 92A 48U | (18.12.17)