Table des Matières
Publicité
P/N: EAL0408G43A P/N: EAL0413G17A
P/N: EAL0408G42A P/N: EAL0383G02A
P/N: EAL0408G78A
P/N: EAL0413G13A
8
Safety
EAL0408G43A - EAL0413G17A
Risk of crushing.
• Become familiar with all controls before proceeding with
operations.
• Stand away from the bead breaker arm when in operation.
• If necessary for improved bead breaker control, operate
it in steps.
• Do not allow anyone not involved in servicing to approach
the unit.
Contact with moving parts could cause injury.
EAL0408G42A - EAL0383G02A
Risk of pinching or crushing hands and fingers/toes.
• Keep hands and fingers/toes far from rim edge during
operating steps.
• Keep hands and fingers/toes far from mounting/
demounting tool during operation.
• Keep hands and fingers/toes and other body parts away
from moving surfaces.
• Do not use tools other than those supplied with the tyre
changer.
• Do not use unapproved accessories (see the Accessories
Plan).
• Do not by-pass in any way the safety devices.
• Use special solutions to prevent tyre friction.
Accidental contact with moving parts could cause injury.
EAL0408G78A
Personal protective equipment warning.
• The plate shows the equipment required for use of the
unit.
• Wear the indicated equipment before operating the
equipment.
T H E U S E O F P E R S O N A L P R O T E C T I V E
EQUIPMENT IS A LEGAL REQUIREMENT.
EAL0413G13A
Risk of injury. Tools may break or slip if improperly used
or maintained.
• Use the correct tool for the task.
• In accordance with the maintenance plan, inspect and
clean all tools.
• Follow recommended procedures when performing
services.
Tools that break or slip can cause injury.
IN ORDER TO USE THE MACHINE THE OPERATOR
MUST KNOW THE MEANING OF ALL THE
PICTOGRAMS FOUND ON THE MACHINE.
IMPORTANT!! KEEP THESE
INSTRUCTIONS
Publicité
Table des Matières
