Table des Matières
Publicité
F
G
a
4
36
E
4.1-4
c
b
4.1-5
4.1-6
3
4.1-7
Layout
E.
- Insert the foot under the pedal and pull up; the lifter will
move up. Once the desired height is reached, release
the pedal to stop the lifter.
- Press the pedal down to make the lifter move down.
- Release the pedal to stop the lifter. To
move the lifter down completely, keep
the pedal pressed until the lifter reaches the ground.
It is forbidden to use the lifter for purposes other than
loading/unloading wheels (or rims) from the Turntable.
The lifter has a maximum capacity of 70 Kg/154 lb.
DEMOUNT THE TYRE WITH THE
CAUTION: THE OPERATIONS COULD BE
DANGEROUS. FOLLOW THE SAFETY
INSTRUCTIONS INDICATED ON THE APPLIED
DANGER OF FEET CRUSHING
F.
The push-button on the handle allows releasing the
arms and driving the mounting/demounting tool in the
correct position.
1.
To release and move up the slide with the tool:
press the button with your forefinger in the sense
indicated by the arrow (A, Fig. 4.1-5).
2.
To release and move down the slide with the tool:
press the button with your thumb in the sense indicated
by the arrow until you feel a resistance increase (B,
Fig. 4.1-5).
3.
To lock: push the button with the thumb (C, Fig. 4.1-5).
DANGER OF HAND CRUSHING
G.
Press down the inflator pedal (1, Fig. 4.1-6): air will
2
come from inflation hose end only (2).
Press the button on the Tubeless Beading Nozzle
(3, Fig. 4.1-7), then press the pedal all the way down
decisively (1, Fig. 4.1-6); a high pressure air jet exits
the Tubeless Beading device.
CAUTION: HOLD THE TUBELESS BEADING
NOZZLE FIRMLY.
Note: Air simultaneously continues to exit the hose
connected to the tyre.
DO NOT MOUNT AND
LIFTER UP.
PLATES.
Publicité
Table des Matières
