Eu Declaration Of Conformity - GIESSE VARIA SLIM BASE Manuel D'utilisation Et D'installation

16. EU DECLARATION OF CONFORMITY

The Company
in its capacity as MANUFACTURER
Declares that the product described below:
Designation: VARIA SLIM BASE
Model: VARIA SLIM BASE 24V, VARIA SLIM BASE 230V
Intended use: Electromechanical actuator with chain for automation of bottom-hung and top-hung windows,
pivoting windows, skylights and other casement types.
Serial data and year of construction shown on the product nameplate.
with the Essential Requirements and the provisions of the following European
Directives:
-
2014/30/EU (Electromagnetic Compatibility Directive)
-
2011/65/EU (ROHS Directive)
based on application of the following harmonized standards:
- EN 55014-1 (2017)
- EN 55014-2 (2016)
- EN 61000-6-3 (2007 + A1:2011)
- EN 61000-6-2 (2005 + AC:2005)
- EN 60335-1 (2012 + AC:2014 + A11:2014)
- EN 60335-2-103 (2015)
- EN 60529 (1997 + A1 2000 + A2 2014)
- EN 62233 (2009)
- EN 50581 (2013)
and accordingly, affixes the
This EU Declaration of Conformity is issued under the sole responsibility of the
manufacturer.
Budrio, dated 26 April 2018
GIESSE S.p.A
Via Tubertini, 1 40054 Budrio (BO) - Italy
Tel +39 051 8850000 - Fax +39 051 8850001
www.giesse.it - infotechgiesse@schlegel.com
Is in conformity
mark
The officer
Peter Santo,
Legal Representative, GIESSE S.p.A
34