Operation - Dometic COMBICOOL ACX Série Notice D'utilisation

ACX35, ACX40, ACX40G
➤ To increase the cooling level, turn the temperature controller (2) clockwise.
For the maximum cooling level, turn the temperature controller (2) to the
maximum position.
➤ To decrease the cooling level, turn the temperature controller (2) anticlockwise.
➤ To switch the cooler off, turn the temperature controller (2) anti-clockwise as far
as it will go (position "").
6

Operation

!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
A
NOTICE! Beware of damage
• Ensure that the items placed in the cooler are suitable for cooling to
the selected temperature.
• Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze. and can therefore
destroy glass containers.
• Ensure that your refrigerated container is well ventilated so that any
heat created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
I
NOTE
• Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (see also
chapter "Cleaning and maintenance" on page 23).
• Cool the cooler for about 24 hours before starting your journey using
gas or electricity from the mains. This way your cooler will attain the
required cooling level faster when you reach your destination.
• The cooling performance can be affected by:
– the ambient temperature
– the amount of food to be conserved
– how often the lid is opened.
• A few water drops may form inside the cooler if it has been cooling
for a lengthy period. This is normal because the moisture in the air
condenses to water when the temperature in the cooler falls. The
cooler is not defective. Wipe it out with a dry cloth if necessary.
EN
Operation
17