How Do I Load Paper Using The Front Path; How Do I Unload Paper From The Front Path - HP Designjet 130 Guide De Référence Rapide

HP Designjet 130/130nr Printer - Quick Reference Guide

How Do I Load Paper Using the Front Path?

4. Place a piece of paper on the output tray, aligning it on the right of the
output tray, with the side that is to be printed facing down. Do NOT stack
paper.
5. Push the paper into the printer, pushing it firmly in as far as it will go, while
maintaining its alignment to the right. Slide the tab on the left of the paper
until it is holding the paper against the right side of the tray.
6. Press the OK key (the upper right key) on the front panel. The printer will
check the alignment of the paper, and if it is misaligned, it will eject the
paper; in that case you will have to reload the paper.

How Do I Unload Paper from the Front Path?

If you want to change or remove the paper that you have loaded before
printing, for example to change the type of paper or to use a different input
path:
• Press the Cancel and OK keys at the same time, to eject the paper.
5