Dometic ORIGO A100 Notice D'utilisation page 19

Dometic ORIGO
8.3 Extinguish the flame
➤ Turn the control knob to the Off position.
✓ The burned is closed.
➤ Wait about five seconds.
➤ Turn the control knob to the Maximum position to make sure the flame is
extinguished.
✓ The burner is open.
➤ Turn the control knob to the Off position.
✓ The burner is closed.
➤ If applicable, wait until the stove has cooled down completely before
replacing the glass lid (accessory).
8.4 Using the heating element
(Dometic ORIGO C100 and C200 only)
NOTICE!
A
Never use alcohol and electrical burners simultaneously to prevent
overheating which can destroy the heating element.
➤ If applicable, lift the glass lid (accessory).
➤ To switch on the heating element push and turn the power setting knob
clockwise.
➤ Choose the desired power.
➤ To switch off the heating element turn the power setting knob to the Off
position.
➤ Let the element cool down completely, before you close the glass lid
(accessory) or touch the stove top or let flammable material contact the
stove top.
EN
Using the stove
19