Technical Specifications - Fermax DUOX Manuel D'installation

TECHNICAL SPECIFICATIONS

Power Supply:
Consumption (+/- 10%):
Environmental conditions: Operating Temperature: -5º C to +40º C
In these technical instructions the following symbols have been used:
Press the OK key to continue
OK
Press the ON/OFF key to continue
ON
OFF
Select the desired option by pressing either "forward" or "back"
Press the "forward" key to advance in the operation
1 2 3
Use the numerical key to enter the required data
4 5 6
7 8 9
0
Press the ESC key to return to the previous menu
ESC
18 Vdc (taken from the installation) or
5 V (via the USB connector)
9 V (via the telephone connector)
Powered by DUOX Bus
77 mA in standby
85 mA when active and navigating through the menus
100 mA when active and the TX/RX bus is active.
Powered by USB.
245 mA in standby
240 mA in active and with the DUOX telephone connected
Relative Humidity: 5-95 %
Level of IP protection: 30
OK