Fermax DUOX Manuel D'installation page 43

DETECTING GENERAL ENT. PANELS (IM)
This function allows you to detect the existence of panels configured as GENERAL
ENTRANCE within the installation, along with the panel number.
For this, follow these steps indicated in the diagram:
1. DETECTOR
GENERAL ENTRANCE
TEST RESULT:
ALL PANELS
No panels have been
detected
TEST RESULT:
NO PANELS
Exit this function and return to the PANEL DETECTION menu
ESC
We start from the GENERAL ENTRANCE PANEL
DETECTION option on the PANEL DETECTION menu:
OK
Start testing the 10 possible panel numbers that may exist as
PANELS
general entrance.
00
The digits display the panel number being tested.
After having completed the scan, you can present one of these 3
results:
All 10 panels have
been detected
TEST RESULT: ?
DETECTED
TEST RESULT: ?
NO DETECTED
Only some panels have been detected.
Choose if you want to view the detected or
undetected ones.
OK
PANEL OK:
OK
PANEL NOK:
The panels
detected are
07
displayed
The panels NOT
detected are
04
displayed