Accident Prevention Warnings; Warnings; Results Of Statutory Tests; Sound Level - Oleo-Mac OS 530 ERGO Manuel D'utilisation Et D'entretien

1 - INTRODUCTION
4) Warranty will be invalidated by:
a. Obvious lack of maintenance.
b. Incorrect use of the machine or evidence of tampering.
c. Use of unsuitable lubricants or fuels.
d. Use of non-original replacement parts or accessories.
e. Repairs carried out by unauthorized persons.
5) The Manufacturer's warranty does not cover expendable materials and parts subject to normal wear and tear in operation.
6) Changes designed to update and improve the product are not covered by warranty.
7) Warranty does not cover routine adjustments and servicing operations that may be required during the warranty period.
8) Damage occurring during transit must be reported immediately to the carrier, otherwise the warranty will be invalidated.
9) Where engines of other makes (Briggs & Stratton, Tecumseh, Kawasaki, Honda, etc.) are fitted to Emak machines, these
are covered by the engine manufacturer's own warranty.
10) Warranty does not cover damage caused directly or indirectly to persons or property by machine breakdown, or resulting
from enforced and prolonged periods when the machine is out of service.
WARNING!
When claiming a repair under warranty, in accordance with the terms and conditions stated above, the defective prod-
uct (shaker or other equipment) must always be accompanied by the warranty certificate, correctly filled in, and relative
proof of purchase (invoice or other legally valid document).
2

- ACCIDENT PREVENTION WARNINGS

2.1 Warnings

WARNING!
The manufacturer declines any liability deriving from non-compliance with the following standards.

2.1.1 Results of statutory tests

WARNING!
Risks associated with exposure of the operator to noise and/or vibration of the machine or equipment.

1) SOUND LEVEL

Continuous equivalent A-weighted sound pressure level registering at the ear of the operator, measured in accord-
ance with UNI EN ISO 3744:
Sound power level measured in accordance with UNI EN ISO 3744:
Given that the ear of the operator is exposed to LpA > 90 dBA, the following procedures must be observed:
• Obligation to inform the operator and provide specific training.
• Obligation to provide hearing protection devices and ensure they are effectively utilized.
2) VIBRATION LEVELS
The mean weighted acceleration to which hand and arm are exposed, measured in accordance with EN ISO 5349, is:
Load test on front handle (LX) = 32.7 m/s
Load test on rear handle (RX) = 20.2 m/s
Mean weighted values: ½ at minimum and ½ at full load.
Given that the arms are subjected under load conditions to an acceleration value greater than 2.5 m/s
ing procedures must be observed.
• The operator must be informed of the risks connected with exposure to vibrations.
• The operator must undergo periodic health checks.
• The employer must take the necessary measures to minimize the risk of exposure for the user.
16 - 80
LpA = 95 dBA
eq
LwA = 105 dBA
2
2
2 , the follow-