Introduction; Functions And Use Of The Operator Instruction Book; Symbols And Operator Status; Important - Oleo-Mac OS 530 ERGO Manuel D'utilisation Et D'entretien

1 - INTRODUCTION

1.1 Functions and use of the Operator Instruction Book

To ensure the safety of the operator and avoid damage to persons or property in general, it is essential that the contents of the
manual are read in full and properly understood before proceeding to use the machine.
The purpose of these instructions is to describe the operation of the machine and ensure it is used safely, economically and in
accordance with statutory regulations. Observing the instructions will help to avoid risks, minimize the cost of repairs and work
stoppages, and prolong the life of the machine.
The Operator Instruction Book must remain intact, presentable and legible in its entirety; every operator entrusted with the use
of the machine or responsible for its maintenance must know where the book is kept and be able to consult it at any time. If the
Shaker is lent, hired or given for whatever reason to other persons, be certain the recipient is also given the manual to read
before using the machine.

1.2 Symbols and operator status

The various man-machine interactions described on these pages must involve only persons identifiable according to the direc-
tions of the manufacturer. Every operation described will be accompanied by a symbol indicating the operator best equipped to
perform the task. The following indications are given to facilitate the correct identification of professional status.
Operator
Person or persons entrusted with general installation, operation and adjustment, and routine maintenance, cleaning, repair or
transportation of the machine.
Maintenance technician
An individual with specific mechanical skills, capable of carrying out installation and major servicing and/or repair operations as
indicated in this publication.
AUTHORIZED SERVICE CENTRE
Any workshop nominated by Emak dealers and authorized to carry out repairs on machines made by the company.
WARNING!
Precautionary measure that must be taken in order to ensure the safety of the operator and of persons in the work area.

IMPORTANT!

Advice that must be followed to prevent the machine being damaged or malfunctioning, or to ensure compliance with
current standards or regulations.

1.3 Declaration of conformity

Every machine manufactured for sale in countries of the European Union (EU) is supplied with specifications responding to the
requirements of applicable directives. The relative declaration of conformity issued by the manufacturer is attached to the
Operator Instruction Book.

1.4 Taking receipt of the machine

On taking receipt of the product, make certain that:
• it has not been damaged in transit;
• the equipment supplied is effectively as ordered, inclusive of any accessory parts (see "Description of product" - "Technical
Specifications").
If problems should arise, contact the manufacturer's customer service department, supplying details of the machine as indi-
cated on the data plate (see "Identification of product" – "Technical Specifications").

1.5 Warranty certificate

This machine has been designed and built employing the very latest manufacturing methods. Machines sold to private users are
guaranteed by the manufacturer for a period of 12 months from the date of purchase. Warranty is limited to 6 months on
machines for professional use, and 3 months on machines for hire.
General conditions of warranty
1) The warranty period runs from the date of purchase. Parts found to be defective in terms of material, workmanship and
manufacture will be replaced free of charge by the manufacturer, through the Emak sales and service network. The statu-
tory rights of the purchaser to pursue product liability actions remain unaffected by the terms of the warranty.
2) Technicians will respond to claims in the shortest time possible, consistent with organizational requirements.
3) To claim any repair or replacement of parts under warranty, the certificate below, bearing the stamp of the dealer and with
all details filled in, must be presented to the Emak authorized representative together with an invoice or till receipt showing
the date of purchase.
15 - 80