Removal Of The Electric Heater Battery; Condensation Outlet In The Unit; Terminal Box With Isolator/Main Switch; Accessories - Helios ECgreen Vent KWL EC 800 S Pro WW Notice D'installation Et D'utilisation

Installation and Operating Instructions
m
WARNING
Central Ventilation Units KWL EC.. S Pro/WW
6.5

Removal of the electric heater battery

1. Dismantle the cross-flow heat exchanger as described in section 6.1
2. Disconnect the cable connections (Fig.27)
3. Loosen the fixing screws of the heater battery (Fig.28/29).
4. Remove the electric heater battery (Fig.30)
m RISK OF BEING CUT! Sharp edges!
6.6

Condensation outlet in the unit

Ensure that the lateral condensation outlet (ø 22 mm) is secured above the base tray (see also section 2.3) for main-
tenance measures.
6.7

Terminal box with isolator/main switch

The terminal box that is connected to the side of the casing ensures free access to the electronic components (e.g.
batteries, fuses or DIP switch settings).
6.8

Accessories

WHSH HE 24V (0-10V)
KWL-ÜS 800 S
KWL-ÜS 1200 S
KWL-ÜS 1800 S
KWL-ÜS 2600 S
KWL-CO
2
KWL-FTF
KWL-VOC
RVM ...
KWL-SB ... S
Fig.27
Fig.29
Ref. no. 8318 Temperature control system for warm water heater battery
Ref. no. 8339 Symmetrical adapter piece
Ref. no. 8349 Symmetrical adapter piece
Ref. no. 8340 Symmetrical adapter piece
Ref. no. 8341 Symmetrical adapter piece
Ref. no. 4272 CO sensor for detecting the concentration of the room air
2
Ref. no. 4273 Humidity sensor for detecting room air humidity
Ref. no. 4274 VOC sensor for detecting the mixed gas (VOC) concentration
s. documents Backdraught shutter, motorised
s. documents Base cover made of galvanised sheet steel
27
EN
Fig.28
Fig.30