Helios ECgreen Vent KWL EC 800 S Pro WW Notice D'installation Et D'utilisation page 56

Installation and Operating Instructions
EN
Menu 09 – Temperature sensor
07 -
08 -
10 -
11 -
Temperature probe Temperatursensor
Temperature probe
Supply air duct:
Temperature sensor for the supply air in the building.
Extract air duct:
Temperature sensor for the extract air in the building.
Room:
The temperature sensor (option) installed in the measurement area for
connection to circuit board A1 terminal 55-56.
Menu 10 – Supply air duct limit
08 -
09 -
11 -
12 -
Maximum
temperature
supply air duct
Meze foukání
Minimum
temperature
supply air duct
It is recommended to keep the flow rate reduction activated.
If the sensor in the supply air duct is selected, a maximum tempera-
ture cannot be set at the same time.
Central Ventilation Units KWL EC.. S Pro/WW
Heizregister
AQS Sensor
Temperatursensor
Zuluftkanalgrenzwer
Bypasstemperatur
Blowing
Blowing
Zuluftkanal
Suction Suction
Abluftkanal
Surroundings Surroundings
Raum
Target temp. Target temp.
sensor to set sensor to set
the unit the unit
AQS Sensor
Temperatursensor
Zuluftkanalgrenzwer
Bypasstemperatur
Luftstromabweichun
Activate or deactivate the unit
output reduction if the minimum
temperature is not reached
(activated as standard).
Menu 11 – Bypass temperature
12 -
13 -
Posun toků
Bypass temperature
Odtok 0 %
Minimum outside air temperature at which bypass can be opened.
Range 0-20 °C.
Menu 12 – Supply air flow deviation
Posun toků
Odtok 0 %
18
Bypasstemperatur
Luftstromabweichun
Notfallluftstrom
Set the air
flow deviation
(positive pres-
sure, negative
pressure)