Built­in Cabinet Instructions - Avintage AV79XDZI-1 Notice D'utilisation

NOTE: Make sure that the socket and ON/OFF switch are easily accessible after the appliance has been
installed.
BUILT­IN CABINET INSTRUCTIONS
The wine cooler door seals the installed unit almost completely, so an air vent must provided in the base of the housing.
Warmed air must be conducted via the ventilation shaft to the rear wall of the housing and then expelled upwards. The
ventilation channels should measure at least 200 square centimeters in cross-section.
WARNING: To ensure the proper functioning of the appliance, air vents should never be blocked or covered.
Model 85 cm
Model 122 cm
Attention
• Store wine in sealed bottles.
• Do not overload the cabinet.
• Do not open the door unless necessary.
• Do not cover shelves with aluminum foil or any other shelf material which may prevent air circulation.
Should the wine cooler be left empty for long periods it is suggested that the appliance is unplugged, and after careful
cleaning, leave the door ajar to allow air to circulate inside the cabinet in order to avoid possible condensation, mold or odors
forming.
18