Setting
Maximum ISO
Auto
Metering
Exposure
Bracketing
With this feature, the camera can set the ISO
value automatically between ISO 100 and
the maximum sensitivity value according to
the exposure conditions. The available op-
tions are 200, 400 and 800 (standard).
The measurement method for the calcula-
tion of the exposure is defined here:
Multi - selects an exposure based on the
measurement results at several points in the
shooting range.
Center - the light in the entire shooting
range is measured but the measurement is
weighted towards the values near the centre.
Spot - an exposure is selected on the basis of
one single measurement in the centre of the
picture.
Use this feature to take photos with different
exposure compensation levels. When using
bracketing, a series of three photos is taken
in the following order: standard exposure,
under-exposed and over-exposed.
The available settings are: Off, ±0.3, ±0.7 and
±1.0.
Meaning
DE
EN
FR
NL
137 of 338