AYA ATI3 Instructions D'utilisation page 55

When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows "- -" when the setting time finished.
b) Setting the timer to turn one cooking zone off
Touching the heating zone selection control that you want to set
the timer for. (e.g. zone 3#)
Touch timer control, the minder indicator will start flashing and
"10" will show in the timer display.
Set the time by touching the or control of the timer
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
Touching the "-" and "+" together, the timer is cancelled, and the
"00" will show in the minute display.
Set one zone
54