Règles Générales De Sécurité - Milwaukee 48-59-1801 Mode D'emploi

Masquer les pouces Voir aussi pour 48-59-1801:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FIVE YEAR TOOL LIMITED WARRANTY
Every MILWAUKEE electric power tool (including battery charger) is warranted to the original
purchaser only to be free from defects in material and workmanship. Subject to certain ex-
ceptions, MILWAUKEE will repair or replace any part on an electric power tool which, after
examination, is determined by MILWAUKEE to be defective in material or workmanship for
a period of fi ve (5) years* after the date of purchase. Return the electric power tool and a
copy of proof of purchase to a MILWAUKEE factory Service/Sales Support Branch location
or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does
not apply to damage that MILWAUKEE determines to be from repairs made or attempted by
anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal
wear and tear, lack of maintenance, or accidents.
* The warranty period for Hoists (lever, hand chain, & electric chain hoists), all Ni-CD battery
packs, Work Lights (cordless fl ashlights), Job Site Radios, and Trade Titan™ Industrial Work
Carts is one (1) year from the date of purchase. *The warranty period for Li-Ion battery packs
that do not contain V™-technology – 4.0 volts through 18.0 volts - is two (2) years from the
date of purchase.
*There is a separate warranty for V™-technology Li-Ion Battery Packs V™18 volts and above
that accompany V™-technology cordless power tools:
*Every MILWAUKEE V™-technology Li-Ion Battery Pack 18 volts or above is covered by an
initial 1000 Charges/2 Years free replacement warranty. This means that for the earlier of
the fi rst 1000 charges or two (2) years from the date of purchase/fi rst charge, a replacement
battery will be provided to the customer for any defective battery free of charge. Thereafter,
customers will also receive an additional warranty on a pro rata basis up to the earlier of the
fi rst 2000 charges or fi ve (5) Years from the date of purchase/fi rst charge. This means that
every customer gets an additional 1000 charges or three (3) years of pro rata warranty on
the V™-technology Li-Ion Battery Pack 18 volts or above depending upon the amount of use.
During this additional warranty period, the customer pays for only the useable service received
over and above the fi rst 1000 Charges/2 years, based on the date of fi rst charge and number
of charges found on the battery pack via Milwaukee's V™-technology Service Reader.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE
product. However, proof of purchase in the form of a sales receipt or other information deemed
suffi cient by MILWAUKEE is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DE-
SCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF
EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU
SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LI-
ABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES,
OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED
TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY
PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CON-
DITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE
GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL
OTHER WARRANTIES.
This warranty applies to product sold in the U.S.A., Canada and Mexico only.
8
RÈGLES GÉNÉRALES DE SÉCURITÉ
AVERTISSEMENT
LIRE ET COMPRENDRE TOUTES LES INSTRUCTIONS.
Le non-respect des instructions ci-après peut entraîner des chocs électriques, des
incendies et/ou des blessures graves.
CONSERVER CES INSTRUCTIONS
Ce manuel de l'opérateur contient des instructions importantes en matière de sécurité et
de fonctionnement pour les batteries au lithium-ion 18V MILWAUKEE et leurs chargeurs
au lithium-ion MILWAUKEE. Avant d'utiliser les batteries et le chargeur, lire ce manuel de
l'opérateur, le manuel de l'opérateur de l'outil et toutes les étiquettes de la batterie, du chargeur
et de l'outil.
1.
MISE EN GARDE! POUR MINIMISER
LES RISQUES DE BLESSURES COR-
PORELLES, SEULE LA BATTERIE
AU LI-ION MILWAUKEE DOIT ÊTRE
RECHARGÉE AVEC CHARGEUR AU
LI-ION. D'autres types de chargeurs
peuvent causer des blessures ou des
dommages. Le bloc de batteries et le
chargeur ne sont pas compatibles avec
les systèmes NiCd ou de technologie
V™. Ne pas relier un bloc de batteries
à une prise d'alimentation électrique
ou à un allume-cigare de voiture pour
ne pas désactiver ou endommager de
façon permanente le bloc de batteries.
2.
UTILISER UNIQUEMENT LES BLOCS
AU LITHIUM-ION DE MILWAUKEE
SUR DES OUTILS COMPTATIBLES
AU LITHIUM-ION DE MILWAUKEE.
Le bloc de batteries et le chargeur ne
sont pas compatibles avec les systèmes
NiCd ou de technologie V™. Une utilisa-
tion avec d'autres outils peut causer des
risques d'incendie, de chocs électriques
et de blessures.
3.
ÉVITEZ LES ENVIRONNEMENTS
À RISQUES. N'UTILISEZ PAS LE
CHARGEUR SOUS LA PLUIE, la neige
ou dans les endroits humides ou mouil-
lés. Ne vous servez pas du chargeur
ou de la batterie en milieux explosifs
(émanations de gaz, poussière ou
substances infl ammables), car il pour-
rait se produire des étincelles, lors de
l'insertion de la batterie dans le chargeur
ou lors de son retrait, créant un risque
d'incendie.
4.
RECHARGEZ DANS UN ENDROIT
BIEN VENTILÉ. Ne laissez pas les
évents du chargeur se bloquer et as-
surez-vous qu'ils sont bien ventilés.
N'effectuez pas une recharge de bat-
terie à proximité d'une fl amme vive ou
fumante, afi n d'éviter l'explosion des
décharges de gaz.
5.
ENTRETENEZ LE CORDON DU
CHARGEUR. Pour débrancher le
chargeur, tirez sur la fi che plutôt que sur
le cordon. Ceci minimisera les risques
d'endommager la fi che ou le cordon.
Ne transportez jamais le chargeur en
le tenant par le cordon. Préservez le
cordon de la chaleur, des surfaces
graisseuses et des arêtes tranchantes.
Assurez-vous que l'on ne marche ni ne
trébuche sur le cordon et qu'il ne soit pas
étiré ou mal utilisé. Ne vous servez pas
du chargeur si le cordon ou la fi che sont
en mauvais état. Faites immédiatement
remplacer le cordon endommagé par
une pièce de rechange identique. Voir
"Maintenance".
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

48-59-1815

Table des Matières