aerauliqa AIRQURE-P1 Manuel D'installation, D'utilisation Et D'entretien page 12

G
AIRQURE P1
Whole-house positive input ventilation unit
Read this manual carefully before using the product and keep it in a safe place for reference as necessary.
This product was constructed up to standard and in compliance with regulations relating to electrical equipment and must be
installed by technically qualified personnel.
The manufacturer assumes no responsibility for damage to persons or property resulting from failure to observe the instructions
contained in this manual.
1 INDEX
1 Index
2 Warnings and Precautions
3 Product information
3.1 General
3.2 Dimensions and Weight
3.3 Space required
3.4 Rating labels
4 Transport and Storage
5 Installation
5.1 Unpacking
5.2 Where/how to install
5.3 What is in the box
5.4 Diffuser installation
5.5 Ceiling installation
5.6 Floor installation
5.7 Precabled electric connections
6 Commissioning and operations
6.1 AIRQURE P1-N
6.2 AIRQURE P1-H
6.2.1 Setting of the continuous running (low) speed
6.2.2 Setting of the maximum speed
6.2.3 Setting of the intermediate speed (Heat Recovery Mode)
6.2.4 Setting of the trigger temperature threshold (Heat Recovery Mode)
6.2.5 Setting of the trigger temperature threshold (Summer Stand-by Mode)
6.2.6 Setting of the temperature threshold of the heating element
6.2.7 Continuous running (low) speed
6.2.8 Maximum speed
6.2.9 Heat Recovery Mode
6.2.10 Summer Stand-by Mode
6.2.11 Activation of the heating element
6.2.12 2 speed operation via CTRL-P1 (accessory on request)
6.2.13 Modbus control
7 Maintenance and service
8 Disposal and Recycling
9 ErP Product Fiche
12
12
13
13
13
14
14
14
14
14
14
14
15
15
15
16
16
18
18
18
18
18
19
19
19
19
19
19
19
19
19
20
20
20
21
32