Safety Instructions; Operation - Festool CLEANTEX CT 26 E HEPA Notice D'utilisation D'origine

Mobile dust extractors CT 26 E HEPA, CT 36 E HEPA
Dimensions L x W x H
Weight
5

Safety instructions

Warning! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
– Caution! The machine is unsuitable for
extracting hazardous dust.
– The machine is not intended for use by
persons (including children) with limited
physical, sensory or mental ability or with-
out sufficient experience and/or knowl-
edge, unless they are supervised by a
person responsible for their safety or have
been instructed on how to use the ma-
chine. Children should always be super-
vised to ensure that they do not play with
the machine.
– When extracting hazardous dust or large
quantities of oak or beech dust, only use
the machine in combination with a single
electric or pneumatic tool.
– Risk of explosion and fire hazard: do
not extract sparks or hot dust, flammable
or explosive dust (e.g. magnesium, alu-
minium), flammable or explosive fluids
(e.g. petrol, thinner), aggressive fluids/
solids (e.g. acid, leach, solvent). The ex-
traction of wood dust is permitted. Operate
the machine in a well-ventilated room (ob-
serve national industrial safety regula-
tions).
– Do not damage the mains power cable
(e.g. by driving over, dragging, etc.). Pro-
tect from heat, oil and sharp edges. Do not
pull the plug from the socket by the cable.
– Check the plug and the cable regularly and
have them replaced by an authorised ser-
vice workshop should either become dam-
aged. Always replace the mains power
CT 26 E HEPA
CT 36 E HEPA
CT 26 E HEPA
CT 36 E HEPA
cable with the type specified in the spare
parts list.
– Do not expose the machine to rain.
– The machine should only be used by ap-
pointed persons instructed in correct ma-
chine handling.
– For reasons of safety, never operate the
machine from an unearthed socket.
– Always use the machine socket for the pur-
pose specified in the manual.
– Always use original Festool accessories.
– Pull the plug from the socket when the ma-
chine is not in use and prior to mainte-
nance and cleaning work.
– Do not lift or transport the machine by the
handle using a crane or lifting gear.
6

Operation

WARNING
Unauthorised voltage or frequency!
Risk of accident
X The mains voltage and the frequency of
the power source must correspond with
the specifications on the machine's name
plate.
X In North America, only Festool machines
with the voltage specifications 120 V/60
Hz may be used.
6.1 Initial operation
X
Open the locking clips
the top section of the machine[2-1].
X
Remove the accessories from the dust
container [2-3] and the packaging!
X Insert a filter bag in the dust container
(see chapter 9.1).
X
Replace the top section
the locking clips [2-2].
X
Attach the cable holder to the rear of the
mobile dust extractor (see Fig. [3]).
X
Connect the suction hose to the machine.
CLEANTEX
GB
630 x 365 x 540 mm
630 x 365 x 596 mm
13 kg
13.5 kg
[2-2] and remove
[2-1] and close
13