Safety Instructions; Technical Data - Festool CTL 26 E Notice D'utilisation D'origine

Contents

1 Safety instructions............................ 12

2 Technical data................................... 12

3 Symbols............................................. 13
4 Machine features...............................13
5 Intended use...................................... 13
6 Operation........................................... 13
7 Settings..............................................14
8 Working............................................. 15
9 Service and maintenance..................15
10 Environment...................................... 16
1 Safety instructions
WARNING! Read all safety warnings, in-
structions, illustrations and specifications
provided with this tool. Failure to follow all in­
structions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
- This appliance must not be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge. Children need
to be supervised to ensure they do not play
with the appliance.
WARNING! Machine may contain hazardous
-
dust. Only authorised qualified specialists
2 Technical data
Mobile dust extractors
Power consumption
Maximum appliance socket
connected load
Max. suction capacity (air), turbine
Max. vacuum, turbine
Filter surface area
Suction hose
Length of the net cable
Sound pressure level as per EN 60704-2-1 / Uncertainty K
Protection category
12
with suitable protective equipment may
perform maintenance, empty the container
and change the filter.
- Always operate with the filter system in­
stalled!
Risk of explosion and fire: Do not absorb:
-
- Sparks or hot dust;
- Combustible or explosive materials (e.g.
magnesium, aluminium, petrol, diluting
agents);
- Aggressive materials (e.g. acid, alkaline
solutions, solvents);
- Chemically reactive materials, which
lead to the generation of heat, acids/
bases, gases, etc. (e.g. reactive 2-com­
ponent materials, aluminium and wa­
ter).
- Observe all national safety regulations as
well as the material manufacturer's speci­
fications!
- Always use suitable protective equipment!
- If intact following a visual inspection, work
in a dry environment according to instruc­
tions!
- Always use the socket on the machine for
the purpose specified!
- Check the plug and the cable regularly and
should either become damaged, in order to
avoid a hazard, have them replaced by an
authorised after-sales service workshop.
- Do not lift or transport using a crane hook
or lifting gear!
CH, DK
GB 240 V/ 110 V
350 -1200 W
EU 2400 W
1100 W
1800 W/ 500 W
234 m³/h (3900 l/min)
24000 Pa
6318 cm²
D 27 mm x 3.5 m-AS
7.5 m
71 dB(A) / 3 dB
English
IP X4