Mounting Or Removing Backrest; Mounting Or Removing Battery Housing - Vermeiren Express V Mode D'emploi

2.5

Mounting or removing backrest

L L L L
WARNING:
Risk of injury – Make sure that both securing levers
L L L L
CAUTION:
Chance of pinching – Do not place fingers between the backrest tubes
of the wheelchair.
For transport the backrest of the wheelchair can be completely removed.
2.6

Mounting or removing battery housing

L L L L
CAUTION:
Chance of pinching – Do not place fingers between the battery
housing and guide rails of the wheelchair.
To mount the battery housing on the electric wheelchair:
1. Grasp the handles
2. Lift the battery housing with the plastic bushings
3. Slide the battery housing backwards in the correct position.
4. Turn the locking hook
5. Check that the battery housing is firmly fixated to avoid damage to the battery housing.
6. Connect the cables from the electronic.
To remove the battery housing of the electric wheelchair:
1. Disconnect the cables from the electronic.
2. Turn the locking hook
3. Slide the battery housing to the front.
4. Grasp the handles
5. Lift the battery housing out the rails
To mount the backrest on the electric wheelchair:
1. Check that the levers
loosen the levers
2. Mount the backrest tubes Ⓐ in the hexagonal
tubes of the frame Ⓑ.
3. Retighten the levers
To remove
wheelchair:
1. Turn on the levers
2. Remove the backrest tubes Ⓐ out the hexagonal
tubes of the frame Ⓑ.
to lift the battery housing.
clockwise to secure the battery housing.
anti-clockwise to loosen the battery housing.
to lift the battery housing.
.
Page 11
are engaged.
are not fixated otherwise
.
properly.
the backrest from
until they come loose.
on the rails .
Express V
2013-06
the electric