Table des Matières
Publicité
Guidance and manufacturer's declaration – ELECTROMAGNETIC IMMUNITY –
MIO CARE PRO is intended for use in the electromagnetic environment specified
below. The customer or the user of the device should assure that it is used in such
an environment.
Immunity test
Power frequency
(50/60 Hz) magnetic
field
IEC 61000-4-8
Note: U
is the A.C. mains voltage prior to application of the test level.
T
Guidance and manufacturer's declaration – ELECTROMAGNETIC IMMUNITY –
FOR EQUIPMENT AND SYSTEMS THAT ARE NOT LIFE-SUPPORTING
MIO CARE PRO is intended for use in the electromagnetic environment specified
below. The customer or the user of the device should assure that it is used in such
an environment.
Immunity test
Portable and mobile RF communications equipment should not be used near any
part of the device (including cables) except when the recommended separation
distance is respected. This distance is calculated from the equation applicable to the
frequency of the transmitter.
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
Where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer and d is the recommended separation distance in metres (m).
IACER Srl
FOR ALL EQUIPMENT AND SYSTEMS
Test level
Compliance level
IEC 60601
30A/m
Test level
Conformity
EN 60601
level
3V
3V
eff
eff
from 150kHz
from 150kHz
to 80MHz
to 80MHz
6V
6V
eff
eff
in ISM band
in ISM band
and radio
and radio
bands
bands
between
between
150kHz and
150kHz and
80MHz
80MHz
10V/m
10V/m
from 80MHz
from 80MHz
to 2,7GHz
to 2,7GHz
environment - guide
Power
magnetic
should be at levels
30A/m
characteristic
typical location in a
typical commercial or
hospital environment.
Electromagnetic environment
Recommended separation distance
d = 1,2 √P
from 150kHz to 80MHz
d = 1,2 √P
from 80MHz to 800MHz
d = 2,3 √P
from 800MHz to 2,7GHz
57
Electromagnetic
frequency
fields
of
a
- guide
MNPG164-05
Publicité
Table des Matières
