Vortice HRI-E One Notice D'emploi Et D'entretien page 22

ENGLISH
opened manually
automatically via software (in this case the bypass
cannot be closed manually).
18 Time / °C outdoor temperature
19 °C indoor temperature
Switching On/Off (fig.16)
16 16
FILT
1 2 3
esc
/ °C
By-Pass
The appliance is switched on and off by pressing and
holding the DOWN button on the panel.
Time/day setting (fig.17)
Before proceeding with the steps indicated below, press
the ESC button to quit and return to the initial menu.
17 17
FILT
1 2 3
esc
/ °C
By-Pass
The current time and day can be set as follows:
- press the UP and DOWN buttons together briefly;
- press the UP or DOWN button repeatedly to select the
"hours" setting (HH);
- press the SET button briefly to retain the "hours"
setting and move on to the "minutes" setting (MM);
- press the UP or DOWN button repeatedly to select the
"minutes";
- press the SET button briefly to retain the "minutes"
setting and move on to the "day" setting (dAy);
- press the UP or DOWN button repeatedly to select the
"day" setting;
- press the SET button briefly to retain the "day" setting
and quit.
22
blinking: bypass
P1 P2 HA
4 5 6 7
set
Prg
P1 P2 HA
4 5 7
6
set
Prg
opened Speed setting (fig.18)
Before proceeding with the steps indicated below, press
the ESC button to quit and return to the initial menu.
18 18
The operating speed is preset during appliance
configuration, and can be selected by pressing the UP
button briefly (1=min. speed, 2=med. speed, 3=max.
speed).
Set required room temperature (fig.19)
Before proceeding with the steps indicated below, press
the ESC button to quit and return to the initial menu.
19 19
The preferred room temperature can be selected as
follows:
- press and hold the SET button
- press the SET button briefly (the current value flashes)
- select the required value using the UP and DOWN
buttons
- press the SET button briefly to retain the setting
- press the ESC button briefly to exit.
Activation of "bypass" function (fig.20)
20 20
P1 P2 HA
FILT
1 2 3 4 5
6
esc set
Prg
/ °C
By-Pass
P1 P2
HA
FILT
1 2 3 4 5 6
esc set
Prg
/ °C
By-Pass
P1 P2 HA
FILT
1 2 3 4 5
6
esc set
Prg
/ °C
By-Pass
7
7
7