Additional Configuration - USRobotics 5465 Guide D'installation Rapide

English

Additional Configuration

Connect Wireless Devices
Wi-Fi Protected Setup™ Devices
See your wireless device's documentation to determine if it can connect to the
Wireless MAXg Router using Wi-Fi Protected Setup (WPS). WPS devices use a
push button or PIN to connect to the network. See your wireless device's docu-
mentation to determine which method you should use to connect to the router,
and how to locate the push button or PIN for the device.
If you are using a Wireless MAXg Adapter that is enabled with WPS, see the
wireless adapter's documentation for instructions on starting WPS on the
adapter.
1. Be ready to start WPS on your device.
2. Start your Web browser.
3. In the location or address line, type
ENTER to access the router configuration pages. Enter the user name and
password for the router when prompted.
4. On the Status page, click Add wireless device.
5. Do one of the following:
" To connect a WPS device using a push button, click Find Device, then
push the WPS button on the device.
" To connect a WPS device using a PIN, enter the device's PIN and click
Add Device, then start WPS on the device.
The wireless device detects the wireless security settings of the router and
creates a secure wireless connection to the network.
All Other Devices
1. Ensure that each wireless adapter that will be connected to the network is set
to infrastructure mode. For instruction in changing your adapter's wireless
mode, see your wireless adapter's documentation.
2. Set the Network name or SSID in the wireless adapter's settings to the Net-
work name that is used in the router.
3. Make sure that the wireless security settings for the wireless adapter match
those that you set on the router. For instruction in changing your adapter's
wireless security settings, see your wireless adapter's documentation.
6
http://192.168.2.1
and press