USRobotics 5465 Guide D'installation Rapide page 13

8. Click Finish to complete the setup process.
Windows XP and 2000
1. Do one of the following:
" Windows XP: Click Windows Start > Printers and Faxes.
" Windows 2000: Click Windows Start > Settings > Printers.
2. Click Add a Printer.
3. The Add Printer Wizard will start. Click Next.
4. Choose the radio button labeled A network printer, or a printer attached
to another computer. Click Next.
5. Select Connect to a printer on the Internet or on a home or office net-
work. In the URL field, enter the Printer location address you copied from
the router configuration pages. Click Next.
N o t e : The URL information is case-sensitive and must be entered exactly as
it is listed on the Printer location section on the router's Status page.
6. Select the manufacturer and model of your printer. Click OK.
N o t e : If your printer is not in the list, your printer drivers were not installed
correctly. Repeat ""Step One: Local Printer Installation" on page 7.
7. When prompted, select Yes to set this printer as your default printer. If
prompted, you can choose to print a test page.
8. Click Finish.
Step Four: Verify the Printer's Connectivity
If you did not print a test page in the previous step, print one now to verify that
the printer is connected correctly to the network.
1. Do one of the following:
" Windows Vista: Click Windows Start > Control Panel > Hardware
and Sound > Printers.
" Windows XP: Click Windows Start > Printers and Faxes.
" Windows 2000: Click Windows Start > Settings > Printers.
2. Right-click on your printer and select Properties.
3. Click Print Test Page. The test page should print successfully.
N o t e : If the test page fails to print, refer to "Troubleshooting" in the User
Guide on the USRobotics Installation CD-ROM for additional infor-
mation.
English
9