IWC Schaffhausen DA VINCI AUTOMATIC MOON PHASE 36 Mode D'emploi page 27

— 2 7 —
R E M O V I N G I N D I V I D U A L L I N K S A N D
A T T A C H I N G T H E B R A C E L E T
Repeat steps 1 to 3 at the distance from the first point of separation
you have just determined. Remove the unnecessary links and
reassemble the shortened bracelet. When reassembling the central
link, make sure that the outside is still facing downwards. Reinsert
the external link with both the hinged links, which was removed at
the beginning, back into the bracelet (4). Now you can slide the
opposing external bracelet link back into the bracelet until it lies
flush, by simultaneously pressing down its fixing bolt (5). To finish,
check that the fixing bolts are sitting correctly (6). These must be
brought up flush with the upper edge of the external links. Keep
the surplus links and separating tool in a safe place for use in any
adjustments at another time.
D A V I N C I A U T O M A T I C M O O N P H A S E 3 6